RIP d00d

README.obsolete

@@ -0,0 +1,7 @@
+!!!!!!!!!!! NOTE !!!!!!!!!!!!!
+
+THIS BRANCH IS *NO LONGER MAINTAINED*.
+IT HAS BEEN OBSOLETED BY THE (now merged into master) "python_rewrite" BRANCH.
+DO NOT SEND BUGS REGARDING THIS BRANCH.
+DO NOT USE THIS BRANCH.
+IT IS ONLY KEPT AROUND FOR HISTORICAL REASONS.

bin/build.sh

@@ -155,6 +155,22 @@ then
   exit 0
 fi
 
+# implement for future, needs tweaking- JUST rebuild the ISO.
+#if [[ ${1} == "respin" ]];
+#then
+#  if [[ "${MULTIARCH}" == "y" ]]; 
+#  then
+#    centos_is_stupid
+#    yo_dj any 
+#  else
+#    centos_is_stupid
+#    yo_dj 64
+#    centos_is_stupid
+#    yo_dj 32
+#  fi  
+#fi
+# 
+
 # or are we just building?
 if [[ ${1} == "build" || -z ${1} || ${1} == "all" ]];
 then

docs/README

@@ -16,6 +16,9 @@ It should be fine over ethernet, since hardware switches are much faster and eff
 Future versions, once this project has a dumping ground, will fetch highly compressed snapshotted chroot filesystems instead
 of dynamically building the entire install chroots (both x86_64 and i686) instead (with the option of building fresh locally,
 disabled by default).
+
+Maybe.
+
 Till then, sorry for the inconvenience.
 !!!!!!!!!!!!!!!!!!!!!!
 
@@ -56,11 +59,6 @@ All commands below should be issued in the root working directory of this git re
 but also disk space for working, the finished ISO(s), etc.)
 
 -The following packages installed on the build host:
-(NOTE: future versions will have dependencies checked automatically and installed if necessary,
-depending on distro your host build machine is. the OS detection and package installation component of that isn't
-done yet though. 2014.10.31)
-(NOTE2: Make sure all the packages you specify are valid package names. A mistyped package name will cause the chroot creation to
-break and everything else will break as a result.)
 
 curl
 dosfstools
@@ -72,9 +70,24 @@ squashfs-tools
 xorriso (in RPMForge repo for CentOS 7)
 xz
 
-and *probably* a few others. The scripts run with set -e for the most part, so if something's missed, you'll know.
+and maybe a few others. The scripts run with set -e for the most part, so if something's missed, you'll know.
 Oh, you will know.
 
+If these packages are missing, they will be automatically installed. Currently, the following distros as host build systems
+are supported (assumes most recent release):
+
+Antergos
+Arch
+CentOS
+Debian
+Fedora
+Gentoo
+Mageia
+Manjaro
+openSUSE
+RHEL
+SUSE
+Ubuntu
 
 ## Configuration ##
 See extra/build.conf.sample. Copy to <PROJECT ROOT>/build.conf if you wish to modify any of the values, otherwise the defaults
@@ -105,6 +118,18 @@ Also note the following files/paths:
 --/mirror.lst.sh:
 	Builds a fresh mirror list. Note that it is US based.
 
+-docs:
+	Documentation for BDisk.
+--/COPYING:
+	See LICENSE.
+--/README:
+	This file.
+--/LICENSE:
+	The license file.
+--/FAQ:
+	Several quick questions you might have.
+--/TODO:
+	Some features, bug fixes, etc. I have planned.
 -examples:
 	Included recommendation for how to lay things out, etc.
 --/HTTP:
@@ -112,7 +137,7 @@ Also note the following files/paths:
 -extra:
 	Supporting files for the base building system (mirrorlist, etc.).
 --/${UXNAME}.png:
-	A 640x480 8-bit RGBA colour PNG which will be used as the background for the bootsplash (if booting via BIOS and not UEFI)
+L	A 640x480 8-bit RGBA colour PNG which will be used as the background for the bootsplash (if booting via BIOS and not UEFI)
 --/bootstrap/apacman-*.tar.xz:
 	An AUR-enabled package manager. Necessary for AUR support.
 --/build.conf.sample:
@@ -130,6 +155,8 @@ Also note the following files/paths:
 --/pre-build.d:
 	Contains files injected into the system. Both 64-bit and 32-bit environments. Note: be sure to place them in hierarchical order
 	(e.g. if you wish to have a file at /usr/foo/bar, you will need to place it in <PROJECT ROOT>/extra/pre-build.d/usr/foo/bar)
+        (NOTE: Make sure all the packages you specify are valid package names. A mistyped or nonexistent package name will cause the chroot
+        creation to break and everything else will break as a result.)
 --/pre-build.d/32:
 	Same as above, but only for 32-bit environments.
 --/pre-build.d/64:
@@ -143,8 +170,6 @@ Also note the following files/paths:
 	Here you can find full output of the runs. They are prefixed with run's PID number, and named after the function they occur in.
 -overlay:
 	These files are applied AFTER the initial setup of the chroots. Same hierarchy rules as extra/pre-build.d.
--README:
-	This file.
 -src:
 	Supporting source code/source code from other projects.
 --ipxe/:
@@ -153,14 +178,12 @@ Also note the following files/paths:
 	Various patches and supporting configs to tweak the iPXE build.
 -tftpboot:
 	Files to be served via TFTP for PXE booting. This directory is wiped out during any bin/clean.sh operation.
--TODO:
-	This is just what I'm using to track stuff I want to add.
 
 
 You may notice other files come and go; they're mostly there for extra goodies/used to determine other things.
 
 ## (Re)Building ##
-Building must be done as root, and on an Arch x86_64 system (future versions will allow for non-Arch distros).
+Building must be done as root, and on a supported distro (see Prerequisites for a list).
 
 # bin/build.sh
 
@@ -168,3 +191,10 @@ Yeah. It's that easy. The finished product is in iso/.
 
 
 If you want more verbosity, check out the logs/ directory.
+
+
+## Submitting Patches ##
+If you have a fix or feature you'd like added, please follow the same pull request process for the kernel
+(https://www.kernel.org/doc/Documentation/SubmittingPatches) and email to bts@square-r00t.net
+
+Alternatively, file a bug at https://bugs.square-r00t.net/index.php?project=2 with a patch attached.

extra/mirrorlist

@@ -1,7 +1,7 @@
-# Server list generated by rankmirrors on 2015-02-26
+# Server list generated by rankmirrors on 2016-07-09
+Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
 Server = http://mirrors.advancedhosters.com/archlinux/$repo/os/$arch
-Server = http://mirror.umd.edu/archlinux/$repo/os/$arch
-Server = http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch
-Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
-Server = http://mirror.es.its.nyu.edu/archlinux/$repo/os/$arch
+Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
 Server = http://mirrors.rutgers.edu/archlinux/$repo/os/$arch
+Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
+Server = http://arch.mirrors.ionfish.org/$repo/os/$arch

extra/packages.both

@@ -43,7 +43,7 @@ cpio
 cpuburn
 cpupower
 crackpkcs12
-#cryptcat
+cryptcat
 cryptsetup
 csync2
 customizepkg-scripting
@@ -54,7 +54,7 @@ dd_rescue
 dd_rhelp
 debianutils
 debootstrap
-dialog
+#dialog #giving a weird dependency issue
 diffutils
 djohn
 dmidecode
@@ -107,6 +107,7 @@ gptfdisk
 gst-libav
 gst-plugins-ugly
 hashcat
+hashdeep
 hddtemp
 hdparm
 hexcurse
@@ -140,23 +141,38 @@ keyutils
 kismet-allplugins
 lftp
 links
-#logkeys
-logkeys-keymaps
+#logkeys-git # requires a /dev/input, which apparently isn't included in the chroots
 lm_sensors
 lrzsz
 lshw
-lsiutil
+#lsiutil # giving intermittent errors when trying to fetch source
 lsof
 lsscsi
-lxde
+#lxde # apacman currently doesn't like package groups, so...
+gpicview
+lxappearance
+lxappearance-obconf
+lxde-common
+lxde-icon-theme
+lxdm
+lxinput
+lxlauncher
+lxmusic
+lxpanel
+lxrandr
+lxsession
+lxtask
+lxterminal
+openbox
+pcmanfm
+# end lxde
 lynx
 #lzip
 macchanger
-magicrescue
+#magicrescue # no longer maintained, upstream down
 mbr
 mbuffer
 mcelog
-md5deep
 mdadm
 mdcrack
 # superseded by storcli
@@ -164,11 +180,10 @@ mdcrack
 memtester
 mfoc
 minicom
-mondo
+#mondo # mindi-busybox fails to build 09.23.2016
 mtd-utils
 mtr
 mtree
-#mtx
 multipath-tools
 myrescue
 nbd
@@ -208,20 +223,19 @@ php
 php-fpm
 php-gd
 php-mcrypt
-#phrasendrescher
+phrasendrescher
 pigz
 pkgfile
 pkgtools
 ppp
 pptpclient
-prebootloader
 procinfo-ng
 procps-ng
 progsreiserfs
 psmisc
 pwgen
 pixz
-pyrit-svn
+pyrit
 python2-gnuplot
 python2-pyx
 rarcrack
@@ -239,6 +253,7 @@ rsnapshot
 rygel
 safecopy
 samba
+scalpel-git
 scapy
 screen
 scrounge-ntfs
@@ -254,7 +269,7 @@ smartmontools
 smbclient
 s-nail
 socat
-#star ## do people even USE tape packups anymore?
+#star ## do people even USE tape backups anymore?
 storcli
 strace
 stress
@@ -271,7 +286,7 @@ thttpd
 tmon
 tmux
 tre
-truecrack-svn
+truecrack-git
 truecrypt
 tor
 udftools
@@ -296,7 +311,7 @@ vncrack
 vnstat
 vpnc
 weplab
-whdd
+#whdd #currently depends on dialog, which is broke as shit
 whois
 wifite-mod-pixiewps-git
 wipe

extra/pre-build.d/etc/apacman.conf

@@ -11,27 +11,26 @@
 #buildonly=1
 #cachevcs=1
 #ignorearch=1
-#needed=1
+#keepkeys=1
+needed=1
+#noaur=1
 noconfirm=1
 noedit=1
-#noaur=1
-#noconfirm=1
-#noedit=1
-#nofail=1
+nofail=1
 #preview=1
-#purgebuild=1
+progress=1
+purgebuild=1
 #quiet=1
-#skipcache=1
-skipinteg=1
+skipcache=1
+#skipinteg=1
 #skiptest=1
 #warn=1
-#tmpdir=/var/tmp/apacman
-#TMPDIR=/var/tmp/apacman
 
 #
 # CONFIGURATION
 #
 
+#builddir="/tmp/pkgbuild-$UID"
 #tmpdir="/tmp/apacmantmp-$UID"
 #makepkgconf="/etc/makepkg.conf"
 #usermakepkgconf="$HOME/.makepkg.conf"
@@ -39,19 +38,21 @@ skipinteg=1
 #downdir="/var/cache/pacman/pkg"
 #savedir="/var/cache/apacman/pkg"
 #editor="nano -w"
-editor="vim"
+#pager="less -R"
 #RPCURL="https://aur.archlinux.org/rpc.php?type"
 #PKGURL="https://aur.archlinux.org"
+#WEBURL="https://www.archlinux.org"
 #ABSURL="rsync.archlinux.org"
 
 #
 # COLORIZATION
 #
 
-COLOR1='\e[1;39m'
-COLOR2='\e[1;32m'
-COLOR3='\e[1;35m'
-COLOR4='\e[1;36m'
-COLOR5='\e[1;34m'
-COLOR6='\e[1;33m'
-COLOR7='\e[1;31m'
+#COLOR1='\e[1;39m'
+#COLOR2='\e[1;32m'
+#COLOR3='\e[1;35m'
+#COLOR4='\e[1;36m'
+#COLOR5='\e[1;34m'
+#COLOR6='\e[1;33m'
+#COLOR7='\e[1;31m'
+

extra/pre-build.d/etc/customizepkg.d/autopsy

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+# original URL at sourceforge chokes out
+sed -re 's@^(source=\(").*$@\1ftp://ftp.gnome.org/mirror/temp/sf2015/a/au/autopsy/autopsy/2.24/autopsy-2.24.tar.gz")@g' ${1}

extra/pre-build.d/etc/customizepkg.d/etc-update

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+sed -i -re 's/^(url=)\((.*)\)$/\1\2/g' ${1}

extra/pre-build.d/etc/customizepkg.d/fang

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+sed -i -re 's/^(url=)\((.*)\)$/\1\2/g' ${1}

extra/pre-build.d/etc/customizepkg.d/libnfc

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+sed -i -re 's/^(url=)\((.*)\)$/\1\2/g' ${1}

extra/pre-build.d/etc/customizepkg.d/ms-sys

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+# original URL at sourceforge chokes out
+sed -re 's@^(source=\(").*$@\1http://fossies.org/linux/privat/${pkgname}-${pkgver}.tar.gz")@g' ${1}

extra/pre-build.d/etc/mkinitcpio.conf

@@ -64,4 +64,4 @@ COMPRESSION="xz"
 
 # COMPRESSION_OPTIONS
 # Additional options for the compressor
-#COMPRESSION_OPTIONS=""
+COMPRESSION_OPTIONS="-9"

extra/pre-build.d/etc/pacman.d/mirrorlist

@@ -1,7 +1,6 @@
-# Server list generated by rankmirrors on 2014-11-10
-Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
-Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch
-Server = http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch
-Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch
-Server = http://mirror.cs.pitt.edu/archlinux/$repo/os/$arch
-Server = http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch
+Server = http://mirrors.advancedhosters.com/archlinux/$repo/os/$arch
+Server = http://mirrors.gigenet.com/archlinux/$repo/os/$arch
+Server = http://il.mirrors.linaxe.net/archlinux/$repo/os/$arch
+Server = http://mirror.grig.io/archlinux/$repo/os/$arch
+Server = http://arch.mirrors.ionfish.org/$repo/os/$arch
+Server = http://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch

lib/01-mk.chroot.func.sh

@@ -168,6 +168,7 @@ EOF
     echo "Done."
     echo -n "...Importing keys..."
     ${CHROOTCMD} ${i}/ pacman-key --populate archlinux >> "${LOGFILE}.${FUNCNAME}" 2>&1
+    ${CHROOTCMD} ${i}/ pacman-key -r 93481F6B >> "${LOGFILE}.${FUNCNAME}" 2>&1  # add developer's keys
     echo "Done."
     # Prep base building system
     echo -n "...Installing base packages..."
@@ -179,7 +180,7 @@ EOF
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
     echo "Done."
     echo -n "...Upgrading any outdated packages..."
-    ${CHROOTCMD} ${i}/ pacman -Syyu --noconfirm >> "${LOGFILE}.${FUNCNAME}" 2>&1
+    ${CHROOTCMD} ${i}/ pacman -Syyu --force --noconfirm >> "${LOGFILE}.${FUNCNAME}" 2>&1
     ${CHROOTCMD} ${i}/ pacman-key --refresh-keys >> "${LOGFILE}.${FUNCNAME}" 2>&1
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
     echo "Done. Finishing/cleaning up..."
@@ -196,7 +197,8 @@ EOF
     #${CHROOTCMD} ${i} "pacman --noconfirm -U /var/tmp/pkg/apacman.tar.xz" >> "${LOGFILE}.${FUNCNAME}" 2>&1
     ${CHROOTCMD} ${i} bash -c "pacman --noconfirm -U /var/tmp/pkg/apacman.tar.xz && mkdir /var/tmp/apacman && chmod 0750 /var/tmp/apacman && chown root:aurbuild /var/tmp/apacman " >> "${LOGFILE}.${FUNCNAME}" 2>&1
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
-    ${CHROOTCMD} ${i} bash -c "apacman -S --noconfirm --noedit --skipinteg -S apacman-deps expac" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+    ${CHROOTCMD} ${i} bash -c "apacman -S --noconfirm --noedit --skipinteg -S  apacman apacman-deps expac" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+    ${CHROOTCMD} ${i} bash -c "apacman --gendb" >> "${LOGFILE}.${FUNCNAME}" 2>&1
     #rm -rf ${i}/var/tmp/pkg
     #${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed yaourt >> "${LOGFILE}.${FUNCNAME}" 2>&1
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
@@ -223,6 +225,7 @@ EOF
   for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
   set -e
   ${CHROOTCMD} ${i}/ bash -c "yes '' | apacman --noconfirm --noedit --skipinteg -S --needed ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+  ${CHROOTCMD} ${i}/ "apacman --gendb" >> "${LOGFILE}.${FUNCNAME}" 2>&1
   set +e
   for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
   set -e
@@ -232,6 +235,7 @@ EOF
  if [ -n "${PKGLIST}" ];
  then
    ${CHROOTCMD} ${CHROOTDIR32}/ /usr/bin/bash -c "apacman --noconfirm --noedit --skipinteg -S --needed ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+   ${CHROOTCMD} ${CHROOTDIR32}/ "apacman --gendb" >> "${LOGFILE}.${FUNCNAME}" 2>&1
  fi
  set +e
  for x in $(find ${CHROOTDIR32}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
@@ -241,6 +245,7 @@ EOF
  if [ -n "${PKGLIST}" ];
  then
    ${CHROOTCMD} ${CHROOTDIR64}/ /usr/bin/bash -c "apacman --noconfirm --noedit --skipinteg -S --needed ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+   ${CHROOTCMD} ${CHROOTDIR64}/ "apacman --gendb" >> "${LOGFILE}.${FUNCNAME}" 2>&1
  fi
  set +e
  for x in $(find ${CHROOTDIR64}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
@@ -259,8 +264,9 @@ EOF
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
     set +e
     ${CHROOTCMD} ${i}/ /usr/bin/bash -c "apacman --noconfirm --noedit --skipinteg -S --needed linux" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+    ${CHROOTCMD} ${i}/ "apacman --gendb" >> "${LOGFILE}.${FUNCNAME}" 2>&1
     cp -a ${i}/boot/vmlinuz-linux ${i}/boot/vmlinuz-linux-${DISTNAME}
-    #cp -a ${i}/boot/initramfs-linux.img ${i}/boot/initramfs-linux-${DISTNAME}.img
+    cp -af ${i}/boot/initramfs-linux.img ${i}/boot/initramfs-linux-${DISTNAME}.img
     set -e
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
     # Uncomment if you wish to use the mkpasswd binary from within the chroot...
@@ -268,6 +274,7 @@ EOF
     #for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
     echo -n "Regular packages..."
     ${CHROOTCMD} ${i}/ bash -c "yes '' | apacman --noconfirm --noedit --skipinteg -S --needed ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1
+    ${CHROOTCMD} ${i}/ "apacman --gendb" >> "${LOGFILE}.${FUNCNAME}" 2>&1
     set +e
     for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done
     set -e
@@ -308,7 +315,7 @@ EOF
   set +e
   for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done
   ${CHROOTCMD} ${i}/ /usr/bin/bash -c "mkinitcpio -p linux" >> "${LOGFILE}.${FUNCNAME}" 2>&1
-  cp -a ${i}/boot/initramfs-linux.img ${i}/boot/initramfs-linux-${DISTNAME}.img
+  cp -af ${i}/boot/initramfs-linux.img ${i}/boot/initramfs-linux-${DISTNAME}.img
   set -e
  done
  

lib/09-stuffy.func.sh

@@ -15,8 +15,12 @@ function stuffy {
 
   mkdir -p ${TEMPDIR}/{EFI/{${DISTNAME},boot},loader/entries}
   # this stuff comes from the prebootloader pkg and systemd-boot. lets us boot on UEFI machines with secureboot still enabled.
-  cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${TEMPDIR}/EFI/boot/bootx64.efi
-  cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${TEMPDIR}/EFI/boot/.
+  # the signed prebootloader binaries, however, have been replaced by non-signed ones. so we need to fetch them.
+  # fetched from http://blog.hansenpartnership.com/linux-foundation-secure-boot-system-released/
+  curl -so ${TEMPDIR}/EFI/boot/bootx64.efi "http://blog.hansenpartnership.com/wp-uploads/2013/PreLoader.efi" # MD5: 4f7a4f566781869d252a09dc84923a82 TODO: implement checksumming check
+  curl -so ${TEMPDIR}/EFI/boot/HashTool.efi http://blog.hansenpartnership.com/wp-uploads/2013/HashTool.efi
+  #cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${TEMPDIR}/EFI/boot/bootx64.efi
+  #cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${TEMPDIR}/EFI/boot/.
   cp ${BASEDIR}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi ${TEMPDIR}/EFI/boot/loader.efi # TODO: can i use syslinux.efi instead?
 
   echo "Checking/fetching UEFI shells..."
@@ -69,8 +73,9 @@ EOF
   # now we need to calculate the space for various files we're going to include...
   FATSIZE=$(stat --format="%s" ${TEMPDIR}/boot/${UXNAME}.64.kern) # EFI/BDISK/bdisk.efi
   FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${TEMPDIR}/boot/${UXNAME}.64.img))) # EFI/BDISK/bdisk.img
-  FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi))) # EFI/boot/bootx64.efi
-  FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi))) # EFI/boot/HashTool.efi
+  #FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi))) # EFI/boot/bootx64.efi
+  FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${TEMPDIR}/EFI/boot/bootx64.efi))) # EFI/boot/bootx64.efi
+  FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${TEMPDIR}/EFI/boot/HashTool.efi))) # EFI/boot/HashTool.efi
   FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${BASEDIR}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi))) # EFI/boot/loader.efi
   FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${TEMPDIR}/EFI/shellx64_v1.efi)))
   FATSIZE=$((${FATSIZE} + $(stat --format="%s" ${TEMPDIR}/EFI/shellx64_v2.efi)))
@@ -110,8 +115,8 @@ title   UEFI Shell (v1)
 efi    /EFI/shellx64_v1.efi
 EOF
 
-  cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${SRCDIR}/efiboot/EFI/boot/bootx64.efi
-  cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${SRCDIR}/efiboot/EFI/boot/.
+  cp ${TEMPDIR}/EFI/boot/bootx64.efi ${SRCDIR}/efiboot/EFI/boot/bootx64.efi
+  cp ${TEMPDIR}/EFI/boot/HashTool.efi ${SRCDIR}/efiboot/EFI/boot/.
   cp ${BASEDIR}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi ${SRCDIR}/efiboot/EFI/boot/loader.efi # TODO: can i use syslinux.efi instead?
   cp ${TEMPDIR}/EFI/shellx64_v{1,2}.efi ${SRCDIR}/efiboot/EFI/.
   umount ${SRCDIR}/efiboot

lib/10-yo_dj.func.sh

@@ -288,17 +288,22 @@ EOF
     git submodule init >> "${LOGFILE}.${FUNCNAME}" 2>&1
     git submodule update >> "${LOGFILE}.${FUNCNAME}" 2>&1
     cd ${BASEDIR}/src/ipxe/src
+    git checkout master .
     git clean -xdf > /dev/null 2>&1
     git reset --hard HEAD >> "${LOGFILE}.${FUNCNAME}" 2>&1
     git checkout master >> "${LOGFILE}.${FUNCNAME}" 2>&1
     git pull >> "${LOGFILE}.${FUNCNAME}" 2>&1
     git checkout master >> "${LOGFILE}.${FUNCNAME}" 2>&1
     # It will not build if we don't do this. Apparently we *need* libiberty.
-    git revert -n 40a9a0f0
+    # ...or do we?
+    #git revert -n 40a9a0f0
     ## Apply our patches.
+    # This replaces the 0003 and 0004 patches.
+    # curl -s https://patch-diff.githubusercontent.com/raw/ipxe/ipxe/pull/49.patch > ${BASEDIR}/src/ipxe_local/patches/ipxe-0003-no-PIE.patch 2>/dev/null  # this isn't really necessary, I think? If you're dying right around this step, uncomment.
+    curl -s https://patch-diff.githubusercontent.com/raw/ipxe/ipxe/pull/50.patch > ${BASEDIR}/src/ipxe_local/patches/ipxe-0004-eiso.patch 2>/dev/null
     for i in $(find ${BASEDIR}/src/ipxe_local/patches/ -type f -iname "*.patch" -printf '%P\n' | sort);
     do
-      patch -Np2 < ${BASEDIR}/src/ipxe_local/patches/${i} >> "${LOGFILE}.${FUNCNAME}" 2>&1
+      patch --verbose -Np2 < ${BASEDIR}/src/ipxe_local/patches/${i} >> "${LOGFILE}.${FUNCNAME}" 2>&1
     done
     ## SSL
     SSLDIR="${BASEDIR}/src/ipxe_local/ssl"
@@ -379,9 +384,9 @@ EOF
     mv -f ${BASEDIR}/src/ipxe/src/bin/ipxe.eiso  ${ISODIR}/${MINIFILENAME}
     make clean >> "${LOGFILE}.${FUNCNAME}" 2>&1
     cd ${BASEDIR}/src/ipxe
-    git reset --hard >> "${LOGFILE}.${FUNCNAME}" 2>&1
-    git clean -xdf > /dev/null 2>&1
     git checkout master . > /dev/null 2>&1
+    git clean -xdf > /dev/null 2>&1
+    git reset --hard >> "${LOGFILE}.${FUNCNAME}" 2>&1
     #git reset --hard HEAD > /dev/null 2>&1
     echo
   fi

lib/prereqs/iso.pkgs.lst

@@ -8,6 +8,7 @@ dhcp
 dhcpcd
 dosfstools
 efibootmgr
+efitools
 efivar
 ethtool
 file
@@ -27,7 +28,6 @@ netctl
 networkmanager
 openssh
 openvpn
-prebootloader
 pv
 rsync
 sed

src/ipxe_local/patches/ipxe-0002-banner.patch

@@ -1,6 +1,8 @@
---- a/src/usr/autoboot.c	2015-06-29 04:18:17.055394598 -0400
-+++ b/src/usr/autoboot.c	2015-06-29 22:04:28.692916217 -0400
-@@ -71,6 +71,7 @@
+diff --git a/src/usr/autoboot.c b/src/usr/autoboot.c
+index e93b015..758e187 100644
+--- a/src/usr/autoboot.c
++++ b/src/usr/autoboot.c
+@@ -71,6 +71,7 @@ static int ( * is_autoboot_device ) ( struct net_device *netdev );
  #define NORMAL	"\033[0m"
  #define BOLD	"\033[1m"
  #define CYAN	"\033[36m"
@@ -8,16 +10,27 @@
  
  /** The "scriptlet" setting */
  const struct setting scriptlet_setting __setting ( SETTING_MISC, scriptlet ) = {
-@@ -560,9 +561,9 @@
+@@ -521,7 +522,6 @@ static int shell_banner ( void ) {
+  * @ret rc		Return status code
+  */
+ int ipxe ( struct net_device *netdev ) {
+-	struct feature *feature;
+ 	struct image *image;
+ 	char *scriptlet;
+ 	int rc;
+@@ -538,11 +538,11 @@ int ipxe ( struct net_device *netdev ) {
  	 * do so.
  	 *
  	 */
 -	printf ( NORMAL "\n\n" PRODUCT_NAME "\n" BOLD PRODUCT_SHORT_NAME " %s"
--		 NORMAL " -- " PRODUCT_TAG_LINE " -- "
++       printf ( NORMAL "\n\n" PRODUCT_NAME "\n" BOLD PRODUCT_SHORT_NAME 
+ 		 NORMAL " -- " PRODUCT_TAG_LINE " -- "
 -		 CYAN PRODUCT_URI NORMAL "\nFeatures:", product_version );
-+	printf ( NORMAL "\n\n" PRODUCT_NAME "\n" BOLD PRODUCT_SHORT_NAME
-+		 CYAN PRODUCT_URI NORMAL "\n"
-+		 BOLD BLUE "http://bdisk.square-r00t.net/" NORMAL "\n" );
- 	for_each_table_entry ( feature, FEATURES )
- 		printf ( " %s", feature->name );
+-	for_each_table_entry ( feature, FEATURES )
+-		printf ( " %s", feature->name );
++                CYAN PRODUCT_URI NORMAL "\n"
++                BOLD "BDisk" BLUE "LiveDistro" NORMAL " -- Welp, Yer Boned!(TM) -- "
++                BOLD BLUE "https://bdisk.square-r00t.net/" NORMAL "\n" );
  	printf ( "\n" );
+ 
+ 	/* Boot system */

src/ipxe_local/patches/ipxe-0004-eiso.patch

@@ -1,25 +1,24 @@
-From d2092664b3cf866b2ab338fe056149d3266d0acc Mon Sep 17 00:00:00 2001
+From 189652b03032305a2db860e76fb58e81e3420c4d Mon Sep 17 00:00:00 2001
 From: Christian Hesse <mail@eworm.de>
-Date: Sun, 19 Apr 2015 13:16:09 +0200
-Subject: [PATCH 1/1] allow to build ISO image with EFI support (ipxe.eiso)
+Date: Wed, 24 Feb 2016 09:16:51 +0100
+Subject: [PATCH] allow to build ISO image with EFI support (ipxe.eiso)
 
-Signed-off-by: Christian Hesse <mail@eworm.de>
 ---
- src/arch/i386/Makefile.pcbios |  6 +++++
- src/util/geniso               | 52 +++++++++++++++++++++++++++++++++----------
+ src/arch/x86/Makefile.pcbios |  6 +++++
+ src/util/geniso              | 52 ++++++++++++++++++++++++++++++++++----------
  2 files changed, 46 insertions(+), 12 deletions(-)
 
-diff --git a/src/arch/i386/Makefile.pcbios b/src/arch/i386/Makefile.pcbios
-index ff82373..c7a58eb 100644
---- a/src/arch/i386/Makefile.pcbios
-+++ b/src/arch/i386/Makefile.pcbios
-@@ -59,6 +59,12 @@ NON_AUTO_MEDIA	+= iso
- 	$(QM)$(ECHO) "  [GENISO] $@"
- 	$(Q)ISOLINUX_BIN=$(ISOLINUX_BIN) VERSION="$(VERSION)" bash util/geniso -o $@ $<
+diff --git a/src/arch/x86/Makefile.pcbios b/src/arch/x86/Makefile.pcbios
+index f8c2253..1e01636 100644
+--- a/src/arch/x86/Makefile.pcbios
++++ b/src/arch/x86/Makefile.pcbios
+@@ -86,6 +86,12 @@ NON_AUTO_MEDIA	+= iso
+ 	$(Q)ISOLINUX_BIN=$(ISOLINUX_BIN) LDLINUX_C32=$(LDLINUX_C32) \
+ 	    VERSION="$(VERSION)" bash util/geniso -o $@ $<
  
 +# rule to make a non-emulation ISO boot image with EFI support
-+NON_AUTO_MEDIA	+= eiso
-+%eiso:	%lkrn bin-i386-efi/ipxe.efi bin-x86_64-efi/ipxe.efi util/geniso
++NON_AUTO_MEDIA += eiso
++%eiso: %lkrn bin-i386-efi/ipxe.efi bin-x86_64-efi/ipxe.efi util/geniso
 +	$(QM)$(ECHO) "  [GENISO] $@"
 +	$(Q)ISOLINUX_BIN=$(ISOLINUX_BIN) VERSION="$(VERSION)" bash util/geniso -e -o $@ $<
 +
@@ -27,7 +26,7 @@ index ff82373..c7a58eb 100644
  NON_AUTO_MEDIA	+= liso
  %liso:	%lkrn util/geniso
 diff --git a/src/util/geniso b/src/util/geniso
-index 521c929..9e8588c 100755
+index ff090d4..7694036 100755
 --- a/src/util/geniso
 +++ b/src/util/geniso
 @@ -6,16 +6,21 @@ function help() {
@@ -89,7 +88,7 @@ index 521c929..9e8588c 100755
  fi
  
  dir=$(mktemp -d bin/iso.dir.XXXXXX)
-@@ -122,6 +135,21 @@ case "${LEGACY}" in
+@@ -122,13 +135,28 @@ case "${LEGACY}" in
  		# copy isolinux bootloader
  		cp ${ISOLINUX_BIN} ${dir}
  
@@ -109,9 +108,8 @@ index 521c929..9e8588c 100755
 +		fi
 +
  		# syslinux 6.x needs a file called ldlinux.c32
- 		LDLINUX_C32=$(dirname ${ISOLINUX_BIN})/ldlinux.c32
- 		if [ -s ${LDLINUX_C32} ]; then
-@@ -129,7 +157,7 @@ case "${LEGACY}" in
+ 		if [ -n "${LDLINUX_C32}" -a -s "${LDLINUX_C32}" ]; then
+ 			cp ${LDLINUX_C32} ${dir}
  		fi
  
  		# generate the iso image
@@ -120,6 +118,3 @@ index 521c929..9e8588c 100755
  
  		# isohybrid will be used if available
  		if isohybrid --version >/dev/null 2>/dev/null; then
--- 
-2.3.5
-

src/ipxe_local/patches/ipxe-0004-fix-no-pie-workaround.patch

@@ -1,34 +0,0 @@
-From a4f7e3ba395af4cd0a706df635309d4ef837ecf8 Mon Sep 17 00:00:00 2001
-From: Christian Hesse <mail@eworm.de>
-Date: Wed, 8 Apr 2015 09:51:41 +0200
-Subject: [PATCH 2/2] Fix no-PIE workaround for i386 builds
-
-This workaround did not work for my version of gcc (4.9.2 20150304) as
-no option -nopie exists.
-
-We take another way: Let's check whether or not the macro __PIE__ is defined
-and add -fno-PIE if it is.
-
-Signed-off-by: Christian Hesse <mail@eworm.de>
----
- src/arch/i386/Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/src/arch/i386/Makefile b/src/arch/i386/Makefile
-index 99f8753..897081b 100644
---- a/src/arch/i386/Makefile
-+++ b/src/arch/i386/Makefile
-@@ -75,8 +75,8 @@ CFLAGS			+= -Ui386
- # output on stderr instead of checking the exit status.
- #
- ifeq ($(CCTYPE),gcc)
--PIE_TEST = [ -z "`$(CC) -fno-PIE -nopie -x c -c /dev/null -o /dev/null 2>&1`" ]
--PIE_FLAGS := $(shell $(PIE_TEST) && $(ECHO) '-fno-PIE -nopie')
-+PIE_TEST = $(CC) -dM -E - < /dev/null | grep -q '__PIE__'
-+PIE_FLAGS := $(shell $(PIE_TEST) && $(ECHO) '-fno-PIE')
- WORKAROUND_CFLAGS += $(PIE_FLAGS)
- endif
- 
--- 
-2.3.5
-